Include different equipment like multiplexors, protocol converters and sharing devices, used in telecontrol and communications.

Sharing device , AM01

• Function: allowing the connection of multiple slave devices RS232 over a single port RS232 of the master device.
  Per each AM01 could be connected 4 slaves and also it is possible to connect several AM01 in cascade.
• Master port: 1, with signaling by bicolor led
  Speed: 110 to 115200 bps
• Slave ports: 4, indicated by bicolor led
• Power supply: 24 Vcc
• Applications:
  - Data survey with directional devices
  - Connection of Modbus devices

RS 232 to RS 485 or RS 422 converter, 3 wire, isolated, power supply 12-40 Vdc and 9.5-30 Vac, CNC232-422-485/24

• Function: converting the signals RS232 to signals RS422, RS485 and vice versa.
• Ports:
  - RS232-C
  - RS422/485
  Indication with bicolor leds.
• Speed: up to 57600 bps
• Power supply: DC (12 to 40 Vdc) or AC (9.5 to 30 Vac, 50/400 Hz)

RS 232 to RS 485 or RS 422 converter, 3 wire, isolated, power supply 80-260 Vdc and Vac, CNC232-422-485/220

• Function: converting the signals RS232 to signals RS422, RS485 and vice versa.
• Ports:
  - RS232-C
  - RS422/485
  Indication with bicolor leds
• Speed: up to 57600 bps
• Power supply: direct (85 to 260 Vdc) or alternating (220 V 50/400 Hz)

Serial converter with synchronization signal, CNC232422-SINC

• Function: Convert RS232 signals into RS422 signals.
• Inputs and outputs:
  RS232 side: Terminals: SIN, RX, TX, OV
  RS422 side: Terminals: TA, TB, RA, RB, CA, CB
  Maximum speed: 115200 bps
• Power supply:
  Voltage: 24 Vdc ± 15 %
  Current consumption with 15 Ohm in TA, TB: less than 60 mA

RS232 to plastic fiber optic converter, CONV232FOR-24

• Function: Convert the signals of a RS232 line into signals apt to plastic fiber optic.
• Serial port RS232: signals RX, TX, GND
• Optic serial port: signales RX, TX type plastic fiber optic
• Plastic fiber optic
• Power supply: 9 Vac with middle point, 50 Hz or ±12 Vdc
  Power consumption: less than 5 VA

RS232 to plastic fiber optic converter, CONV232FOR-110

• Function: Convert signals of a RS232 line into signals apt to plastic fiber optic.
• Serial port RS232: signals RX, TX, GND
• Optic serial port: signals RX, TX type plastic fiber optic
• Plastic fiber optic
• Power supply:
  Voltage: 30 - 250 Vdc; 24 - 230 Vac 50/60 Hz
  Consumption: less than 5 VA

RS232 to plastic fiber optic multimode, CONV232FOM

• Function: Convert signals of a RS232 line into optical signals for optical fiber multimode.
• Signals RS232: TX , RX
• Fiber optic signals: TX , RX
• Maximum speed: 115200 bps
• Fiber multimode of 840 nm
• Maximum distance 1500 m (fiber 50/125)
• Conector of fiber: ST
• Power supply: 10 to 30 Vcc

Fiber optic to RS232 signal multiplexer, MULFO

• Function: Multiplex the optic ports into a single RS232 port.
• Serial port RS232: signals RX, TX, GND
• Optic serial ports: signals RX, TX
  Quantity of optic ports: MULFO4-4, MULFO8-8
• Plastic fiber optic
• Power supply: 24 Vdc ± 20 %
  Consumption: 120 mA

Fiber optic to RS232 packet multiplexer, MUXFO

• Function: Multiplex the serial communications of the RS232 port and the optic ports.
• Serial port RS232: signals RX, TX, GND
• Optic serial ports (7): signals RX, TX
  
• Plastic fiber optic
• Power supply: 9 Vac to 12 Vac with middle point, 50 Hz
  Consumption: 10 VA